Elephant No. 340: Place Cards

I came across a pack of interesting papers for a mere dollar a few days ago, and thought it would be fun to try making small cards of some sort. I thought maybe place cards, given the relatively small size of the paper.

This is the pack of "leather-look" papers I bought. There were other colourways—browns, greys, and autumn colours, for example—but I liked this selection best.

I've never actually made place cards before, so I didn't even know what size they should be. Luckily, there are many, many online sites offering designs, templates and sizes. To make the most of the paper I had, I decided to produce a set of eight cards, each measuring about 7.5 by 5.7 cm (3 by 2.25 inches) when finished.

I started by cutting eight flat pieces—each 7.5 x 11.4 cm (3 x 4.5 inches)—which would give me my desired size when folded. I cut two from each of the four colours of paper, then folded them in half, creasing them with a bone folder. You could also use the side of a spoon or even your fingernail.

This was obviously a bit plain, so I cut random oblong shapes from contrasting colours and glued them onto one of the folded sides. I cut two oblongs of each colour as well.

Next, I made two small elephant templates. I figured out the size by tracing first around one of the folded cards, then drawing inside the shape. I didn't care if they fit perfectly on the oblongs—in the back of my mind, I was thinking the cards should be slightly off-kilter.

I traced each elephant shape onto the back of each of the four colours of paper, giving me one elephant shape in each colour. I then glued them somewhat randomly to the fronts of the cards.

This left me with a bit of a problem: where should I write the names of my guests? I didn't really want to scrawl across the elephant or the background, so I decided to cut random strips from scraps of each colour—except the navy blue—and glued them along the sides. I put four strips on the left side of the cards, and four on the right.

Although it took me about two hours to cut and assemble everything, it was certainly not at all difficult. And at only fifty cents for paper—since I only used half the package—it cost next to nothing.

Although I rarely use place cards, I have to say that I'm very happy with the way these turned out, and wouldn't be ashamed to see them on my dining table.

Elephant Lore of the Day
Although it's a bit too easy to anthropomorphize intelligent creatures such as elephants, sometimes they really don't seem to behave much differently than humans.

In the early part of the twentieth century, elephant keeper Henry Sheak reported watching circus elephants going through their routines on their own, without any prompting from human trainers. Starting at the beginning, they would perform the entire routine.

If one of them faltered, that elephant would either take itself off to the side and practice the problematic section, or the whole group would start the routine from the beginning and run through it again. Sheak thought it might be boredom that made the elephants run through their routines, but the fact that they were so orderly about it perhaps argues some higher level of thought.

In the late first century A.D., Roman historian Plutarch reported on something similar. Although most of the emperor's performing elephants managed to learn their routines relatively easily, there was one elephant among them who was a bit slow to catch on. One night, this particular elephant was spied in its enclosure, running through the entire routine on its own by moonlight, without a human in sight.   

Elephants practising at the Canadian National Exhibition, 1913.
Photo: City of Toronto Archives, Fonds 1244
Source: http://www.blogto.com/city/2012/08/5_long-gone_acts_from_the_cne_of_old/

 

To Support Elephant Welfare

World Wildlife Fund

World Society for the Protection of Animals

Performing Animal Welfare Society

Zoocheck

Bring the Elephant Home

African Wildlife Foundation

Elephants Without Borders 

Save the Elephants

International Elephant Foundation Elephant's World (Thailand) 

David Sheldrick Wildlife Trust

Elephant Nature Park (Thailand)

Wildlife Trust of India

Boon Lott's Elephant Sanctuary (Thailand)
Wildlife SOS (India)  
The Elephant Sanctuary (Tennessee, U.S.A.)

Elephant No. 8: Repoussé and Chasing

For today's elephant, I decided to try repoussé with a bit of chasing. The process I used was technically different from true repoussé and chasing—mostly because I didn't have a sheet of metal thick enough to use hammers and embossing tools. Instead, I used a piece of 36-gauge aluminum, and a technique that involved a bit of repoussé and chasing, but which was ultimately more like metal embossing. The principle is similar, but the execution is easier and faster.

Repoussé and chasing are ancient techniques that involve denting metal with various implements to create a design. In repoussé, the artist works on the reverse, creating a design that will appear in low relief when flipped over. Chasing involves the exact opposite: working from the front, the image is indented, to create a design that is depressed. Most metalworking of this type employs both repoussé and chasing, to fine-tune designs and give them extra dimensionality.

When done properly—in other words, not the way I've done it—this is a relatively slow and painstaking process. The metal must be annealed (heated and tempered first), and worked patiently, so that it doesn't crack and break. The softer and more malleable the metal, the quicker you can work. Thicker sheets of metal, and harder types of metal or alloys, will take longer if you are to avoid stressing them too quickly. If you've ever bashed away at a nail and watched the head begin to split and fray at the edges, you've seen metal stress at work.

Proper repoussé and chasing also require exotic equipment such as pitch (a tar-like resin) to allow the design to sink into something with a bit of give, as well as special hammers, tools and punches. Luckily, the metal I used was soft enough that it could be indented with the kind of metal tools you'd use to sculpt clay. For my "pitch" surface, I used a piece of low-pile fleece over a piece of heavy cardboard.

The most widely used metals for this type of work are copper, tin and bronze. This is partly because a high copper content makes metals more malleable, and partly because these metals are relatively inexpensive. Gold and silver are also easy to work, but their cost makes them the kind of thing you only want to play with once you've mastered the technique.

Most people draw their designs on the back of the metal (where they'll mostly be working) with a permanent marker, bearing in mind that the final result will be reversed. I was tempted to avoid the trouble of drawing anything, just so that I could just get started. But then I saw that even artists who bang simple circles into a sheet of metal draw the circles on first.

Rather than draw something of my own today, I chose this head of an armoured war elephant, created around the time of the birth of Christ. An armoured elephant made sense to me for something worked in metal, and I liked the idea of being able to play with texture in the scales and so forth.

Fragment from a copy of a bronze sculpture, ca. 1 A.D.
Collection of the Staatliche Antikensammlung, Munich

To start, I traced the outlines of the photograph onto heavy artist-grade tracing paper. Then, rather than draw onto the aluminum, I laid the tracing on top of the aluminum, and used the end of a fine paintbrush to incise my design. This indents the pilot lines.

The next step involves flipping the aluminum over to the reverse, and using a rounded tool of some sort (I used the cap of a pen) to emboss all the outlined areas. When you flip it back over, all the areas you embossed are now raised like little pillows.

Now comes the creative part. For my elephant, I wanted a fair amount of texture, so I scratched lines into the back, flipped it over and incised the outlines again, added sweeping lines in the ears with the end of a paintbrush handle, used the tip of a pair of tweezers to make little dots through the main part of the armour, and added some more texture from the front. For tools, you can use just about anything that will dent soft metal, and the techniques are pretty much what you'd use to draw or paint. If this were proper repoussé and chasing, on thicker metal, obviously tweezers and a paintbrush would be useless.

After I finished playing with all the textures, I ran a flat, round tool (actually a bottle of white-out) all around the outside edge, to make the design pop just a little more.

This was actually fun. Or perhaps just more my speed than origami and invisible ink.

Elephant Fact of the Day
Although many ancient peoples used war elephants, the Romans trained them primarily as performers. Using elephants whose inherent good nature had not been ruined by war training, the Romans taught them to play cymbals, sit on giant couches in togas, and even walk tightropes. And, when Julius Caesar returned to Rome in 51 B.C., following his final victory in Gaul, there were elephants on either side of the procession, lighting the way with candelabra held in their trunks.

To Support Elephant Welfare
World Wildlife Fund
World Society for the Protection of Animals
Elephant sanctuaries (this Wikipedia list allows you to click through to information on a number of sanctuaries around the world)
Performing Animal Welfare Society